MOBILE-ALERTS MA10101 Kurzanleitung Seite 2

Quick reference
MA10101 cable temperature sensor
MOBILE-ALERTS Sensor
This is a sensor for the "MOBILE-ALERTS" system, it
can be used with this system only. To use the sensor
you need a MOBILE-ALERTS gateway.
Sensor set up
Open the battery compartment of the temperature
sensor and put in 2x AAA batteries with the correct
polarity.
Add Sensor
Open the app, dashboard is displayed. Tap "Add new
sensor" and scan the QR code on the back of the
temperature sensor. Then set a name for the sensor.
Specifications
Batteries:
Battery life:
Measuring range:
Accuracy:
Measurement intervals: 7 minutes
2 x micro (LR03, AAA)
alkaline
approx. 2 years
– 29.9°C to +59.9°C
1 °C
Transmission range:
Transmission frequency: 868 MHz
Maximum transmission
power:
Cable length:
More information and detailed instructions can be found
in the app at "Info" or at www.mobile-alerts.eu
Summary of the Declaration of Conformity: We hereby
declare that this device does comply with the
requirements of RED Directive 2014/53/EU.
The declaration of Conformity can be found at:
www.mobile-alerts.eu/technoline/doc
Old batteries do not belong into general household
waste. You are obliged to return used
batteries to your vendor or collection points.
Electrical devices have to be disposed separately from
the general household waste. Take your old
electronics to your local waste collection point
or recycling centre.
100m (open area)
-4.45dBm
1m