Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Elektronisches Dartboard
· When all 3 darts have been thrown, a voice command will indicate "next player"
and the score will flash. The darts can now be removed without affecting the
electronic scoring. When all darts are removed from the playing surface
press the START button to go to next player. Voice command will indicate
which player is up.
Batteries
If using battery power, insert three "AA" batteries (not included) into the battery
compartment located on the back side of the dartboard toward the base. To remove
the cover, press the latch upward while lifting gently. The batteries must be positioned
as indicated inside the battery compartment to power the dartboard. Do NOT mix old
and new batteries and do not mix alkaline, standard (carbon zinc), or rechargeable
(nickel cadmium) batteries. Do not dispose of batteries in fire, batteries may explode
or leak.
REMOVE batteries if you use adapter.
Caring for your Electronic Dartboard
7.
Never use metal tipped darts on this dartboard. Metal tipped darts will seriously damage
the circuitry and electronic operation of this dartboard.
2.
Do not use excessive force when throwing darts. Throwing darts too hard will cause
frequent tip breakage and cause excess wear on the board.
3.
Turn darts clockwise as you pull them from the board. This makes it easier to remove
darts and extends the life of the tips.
4.
In place of batteries (not included) or AC adapter (included). Use only a genuine AC
adapter for this dartboard. Use of a non-genuine AC adapter may cause electrical shock,
fire, and damage to the electronic circuits and will void your warranty. Remove batteries if
you use adapter.
5.
Remove the batteries when not in use or if using the optional A/C adapter. This will
prolong the life of your batteries.
6.
Do not spill liquids on the dartboard. Do not use spray cleaners, or cleaners that contain
ammonia or other harsh chemicals as they may cause damage.
Automatic Suspend Mode Feature
The dartboard will automatically suspend if no action occurs within approximately three
minutes. This is designed to save power or battery life. A sound effect will play and
the LCD display will indicate "SLEEP" (see below). All scores will be stored in memory
and play will resume when any button is pressed.
20
Werbung
