Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Elektronisches Dartboard
Unpacking the Game
Unpack your new dartboard carefully, making sure all parts are included. The following
components are included in this set:
· 1 Electronic Dartboard
· 6 Darts (unassembled)
Setup / Mounting Instructions
Choose a location to hang the dartboard where there is about 10 feet of open space in front of the
board. The "toe-line" should be 7' 9 1/4" from the face of the dartboard. This dartboard can be
powered battery or adapter. You may want to mount it close to an electrical outlet for
convenience, if you use the adapter. It can be mounted anywhere you have the space if you use
batteries.
Locate a wall stud and place a mark 73.75" from the floor. Center of Bullseye should be 5' 8"
from the floor. Insert adapter or 3 "AA" batteries in the battery compartment on the back of
dartboard (diagram inside compartment. Mount the dartboard on the wall. It may be necessary to
adjust the screws until the board fits snugly against the wall. To add extra secure of mounting, it
Top Screw
73.75"
is suggested to add 4 screws on the front of dartboard.
Wall Stud
X
Floor
17
EN
· Soft tip replacement pack
· Owner's Manual
Dartboard
5' 8" from Floor
to Center of
Bullseye
Toe Line
7' 9 ¼"
Werbung
