Wire Connection; Maintenance; Diagram For Current Regulation - HP Autozubehor HP20032 Bedienungsanleitung

WIRE CONNECTION

While charging a 12V storage battery, please connect the charging clamp (marked 1) to the middle
connection (marked 12V).
While charging a 24V storage battery, please connect the charging clamp (marked 1) to the right
connection (marked 24V).

MAINTENANCE

● Regular maintenance and repair work will ensure proper function and compliance with the safety
requirements.
● Any improper or incorrect operation may cause failure and damage to the machine.
● The warranty period for the machine is one year commencing from the date of purchase. Within this
time, users can take the machine with the invoice to the distributor or the designated department for repair.
● Before the maintenance work for machine is started, the operator must turn off the main power and the
power switch of the machine.
● If the transformer is heating and no current is available from the transformer due to the over current
while of charging, the over-heat protection device inside the charger was tripped to protect the transformer.
In this case, the user should wait until the transformer is cooled before resuming the charging process.
DIAGRAM FOR CURRENT REGULATING
POSITION
1
2
3
START
CHARGE 1
START 2
CHARGING CURRENT
SWITCH LACATION
CHARGE——MIN——1
CHARGE——MIN——2
CHARGE——MAX
START
5
MIN
MAX