Yealink RoomPanel Schnellstartanleitung Seite 10

E
N
5
Remove the RoomPanel
G
L
1. If the security latch has not be installed you can directly pull the
I
RoomPanel to disengage the mounting bracket.
S
H
2. If the security latch has be installed:
a. Pull the RoomPanel away from the wall until it stops.
b. Use the screwdriver to rotate the latch to the open position, which
retracts the security latch arms.
c. Pull the RoomPanel to disengage it from the mounting bracket with
the arms retracted.
RoomPanel
8
Use the screwdriver here
Mounting
Bracket