Commissioning And Operation - Klarfit Feetmaster Bedienungsanleitung

COMMISSIONING AND OPERATION

Mode key
• Mode 1 is preset. Press the key once to enter mode 2. Press the key once
more to enter mode 3.
• In mode 1 the blue light is on, in mode 2 the red light is on. In mode 3, the
blue and red lights flash alternately.
• In mode 1 and 2 the feet are massaged with the foot roller and the air bag,
in mode 3 only with the air bag.
Intensity key
• Preset is low intensity. Press the button once to switch to medium
intensity. Press the button again to switch to high intensity.
• At low intensity the blue light is on, at medium intensity the green light is
on. At high intensity, the red light is on.
Heating key
• In the normal state, the heating is on and the blue light is on. To stop the
heating function, press the heating key. The light goes off and the heating
stops.
Power key
• As soon as you insert the plug into the socket, the device is ready for
operation and the red light flashes.
• Press the button to start the massage. Preset is: mode 1, heating and fan
on. All lights come on. The preset massage time is 10 minutes.
• Once the preset or entered time has elapsed, the unit will return to its
original state (red light flashing).
• After the massage, pull the plug out of the socket.
EN
15