Using Tf Card And Usb Playback (Media Player) - Crosstour P600 Bedienungsanleitung

Using TF Card And USB Playback (Media Player)

Install USB / TF device:
1. Turn off the unit before install USB / TF card.
2. Install the USB device into USB port.
3. After connecting, press the
4. Press the S / SOURCE button to enter and use
5. After selection, use
button to enter. If necessary, use the
enter.
6. Use buttons to search the correct file and press the
OK OK
press the button of unit or
7. Press button to fast search forward and rewind.
8. Press button to search next or previous file.
9. During playback, press the
NOTE: Remove USB / TF device, press the
1. When photo playback, press the
button and more function screen show
on lower (figure 1).
2. Use the button to selecticon and press
the button to play special function.
3. When music playback, press the
button and more function screen show
on lower (figure 2 ).
4. Use the button to select icon and press
the button to play special function.
power button to turn on unit and the power indicator light GREEN.
button to search the MUSIC / PHOTO / MOVIE icon and press the
OK
OK
button to select TF card or USB and press the
OK
button of remote to start playback.
button to pause and press again to restart.
button to turn off power FIRST.
Sub-Menu on Photo screen
Sub-Menu on Music screen
button to search the MEDIAPLAYER mode.
OK
OK
button to preview playback file and
OK
Figure 1
Stop Re... Ra... PL...
Pause Prev. Next
+
Rotate Rotate Zo... Zo...
Figure 2
Pause FB FF Prev. Next Stop Re.... Set A
i
A
Ra... MUTE PL... Info Go..
16
button to
OK
i
A
Info
M Sli...
AB