Connect Hdmi Cable To Show The Image On Projector Screen; Connect Av Cable To Show The Image On Projector Screen - Crosstour P600 Bedienungsanleitung

Connect HDMI Cable to Show The Image On Projector Screen

Follow the below picture to connect HDMI cable and device.
1. Turn off the unit before connecting HDMI cable.
2. After connecting, press the
GREEN
3. Press the /SOURCE button to HDMI mode and the video of HDMI device will show on
S
projector screen.
4. Press the power button to turn off unit.
HDMI HD Signal Input : this interface can be input with HD player.
NOTE: In rare cases, if the projector's speaker has no sound when playing a DVD movie in a player
connecting to the HDMI input, please check the player's digital audio settings and make sure it is
set to "Auto" mode or "PCM"Mode.
AV

Connect AV Cable to Show The Image On Projector Screen

Follow below picture to connect AV cable and device.
1. Turn off the unit before connecting AV cable.
2. After connecting, press the
GREEN
/ SOURCE button to AV mode and the video of AV device will show on projector
3. Press the
S
Screen.
4. Press the power button to turn off unit power.
power button to turn on unit and power indicator will light
TF
HDMI1 HDMI2
USB
power button to turn on unit and power indicator will light
VIDEO
L R S-VIDEO
AUDIO OUT VIDEO OUT
Video Player
12
HDMI OUT