Cleaning And Maintenance; Troubleshooting - ICON IQ.0900.APW Bedienungsanleitung

Cleaning and Maintenance

In order to be able to operate your appliance efficiently for a long time, it is very import-
ant to perform careful and regular maintenance in accordance with the recommenda-
tions in this guide.
- Reflector (reflecting mirror) and quartz glass tubes must be checked by the user at
least once a month against dirt. If dirty, cleaning and maintenance instructions should be
applied.
- Depending on the amount of dust in the usage environment, the said checks should be
performed more frequently.
- Power cord and plug must be checked when cleaning the appliance. If there is defor-
mation on power cord or the plug, it should be taken to authorized service.
- While cleaning the appliance; the reflector, wire and body should be visually inspected
against deformation. If there is deformation, authorized service should be called for the
necessary action.
- It is recommended to replace the reflector every two years for more efficient operation
of the appliance. Reflector must be replaced by authorized service.
A clean reflector ensures that the heating efficiency of the appliance
is maximum.
Cleaning
Attention! Regular and careful cleaning performed by the user ensures that your
appliance runs more efficiently and has longer life.
- Your appliance must be turned off before starting cleaning, the power cord of your
appliance must be uplugged for safety and device must cool down.
- If the reflector (reflecting mirror) and quartz glass tubes are dirty, they should be
cleaned with dry air from outside without opening the protective wire cage of the
appliance.
- The outer surface of the appliance should be cleaned with a soft cotton cloth or a soft
brush.
- Never use abrasive or eroding liquids to clean the heater. These materials can damage
plastic parts.
- Do not clean your appliance using steam cleaners.

Troubleshooting

You can resolve the problems you may encounter with your appliance by checking
the points below before calling technical service.
Problems
Appliance
doesn't operate.
Solution Recommendations
Check that the appliance is plugged in correctly.
Check that the appliance is in vertical position.
(Your appliance has a balance safety.)
Check that the appliance on/off switch and thermostat are in
correct, ON position.
Check that there is no problems in the electrical installation of
the house.
Make sure you correctly apply the using instructions.
If the problem persists, contact nearest simfer authorized
service.
11