Cleaning And Maintenance; General Features; Intended Use; Using The Appliance - CODE HOMME ACT929961698 Bedienungsanleitung

CLEANING AND MAINTENANCE

• Turn off your trimmer and wait until it is completely cool. Before cleaning, remove the accessory and the used blade and clean with
the aid of the cleaning brush that was fi tted in the product.
• Clean your hair trimmer using a damp cloth and then dry it. After each use, follow the instructions to replace the blades of your
hair trimmer.
• To keep the trimmer working properly, oil it with the oil supplied regularly.
• Put the trimmer blades (1) in downward position, dispense 1 or 2 oil drops across the blade. Whipe the excess oil so it does not run
into the motor compartment. Oil in the motor compartment will lead to poor motor performance.

GENERAL FEATURES

Please read these instructions carefully before using this product and
keep them in a safe place for future reference.
1. Trimmer
2. Precision trimmer
3. Shaver
4. Combs: 3 Combs with height adjustment
5. Button ON and OFF
6. USB charging cable
7. Cleaning brush
8. Comb
9. Oil
10. Base store for trimmer and accessories
IN THE BOX
• Rechargeable grooming set
• User manual. Read these instructions before use.
USE
What to do before fi rst use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your
seller immediately.
• Never expose the trimmer to temperatures below -10°C or higher than +40°C for long periods of time.
• In order to get an ideal cutting effect, check all accessories of product, as well as clean and maintain the product.

INTENDED USE

• Warning! Only use the device externally.
• The appliance is only intended for human hair.
• Any incorrect use can be dangerous!
• To remove an attachment, hold the trimmer with one hand and gently rotate the attachment to the right with your other hand.
Now you can take off the attachment. Put on a new attachment and rotate it to the left to lock it in position. When (un)locking the
attachment you can hear a gentle ' c lick', the indication stripe of the attachment and body are now aligned.
• The hair must be clean and dry when being cut.
• Only cut small amounts at one time.
• Cut the hair with progressively closer settings until you reach the desired length.
• The cutting head will jam if you try to work too quickly or try to cut too much hair at once.
• Let the appliance run for a short time before starting to cut.

USING THE APPLIANCE

• Attach the accessory which is to be used in the appliance.
• To withdraw hold the hair trimmer with both hands and press the blades out with your thumb and support the blades to avoid
falling.
• Select the accessory depending on your needs.
4