BESEN Wallbox BS20 BA-11kW-APP Bedienungsanleitung Seite 8

Illustration of Screen and LED
THREE PHASE
Start-up screen
(the version no. is for reference only)
EV Charger
WAITING
Wait for the car to be fully charged
EV Charger
0.0
KW
L1:220V 0.00A
L2:220V 0.08A
L3:220V 0.08A
00 00 06 0.00Kwh 23.7℃
Explanation
of LED Status
Note:
When minor problems like short circuit occou, the wallbox will autommatically restart.
During the restart the box will try to solve the minior problem and to continue to charge.
In case of major failures, the wallbox will not be able to recover and restart again. Once the
user pulls out the charging plug, the wallbox will automatically count down 10 seconds and
restart afterwards. In this case, an electrician must perform troubleshooting.
EV Charger
Wait for connecting the charging
cable with the Wallbox and car.
EV Charger
0.0
KW
L1:220V
L2:220V
L3:220V
22.8℃ 00 00 06 0.00Kwh
During charging process
1. Real-time power
2. Three live wire data
3. Charging time
4. Power consumption
5. Charging power
6. Wallbox temperatur
IDLE CONNECTED
Con�nuous
OFF
light
EV Charger
22.8℃
EV Charger
0.00A
0.08A
Disconnect the Charging Connector
0.08A
23.7℃ 00 10 00
wait for pulling out the plug
EV Charger
Possible
!
fault warning
Short Current
CHARGING FINISHED
Con�nuous
Rolling
light
Press The Button
22.8℃
Wait for identification
0.00Kwh 22.8℃
Stop charging and
1.
Emergency stop
2.
Over current
3.
Over cemperature
4.
Leakage protection
5. Short circuit
29.4℃
ERROR
Red
flashing