Technical Parameters Level 2 EV Wallbox BS20 BC-11kW-APP Model: With charging cable and type 2 charging plug Power connection: 3 phase current (3P + N + PE) Mains voltage AC 230/400 V ± 10%, 50/60 Hz Output rating (max.): 11 kW Output current (max): 16 A per phase Residual current device with...
Seite 4
Installation Guide REFERENCE PAPER Hammer the 30mm of installing screw hole size PLASTIC BOLTS into and position the holes Wall Take down the Drill the holes REFERENCE PAPER according to the from the wall later REFERENCE PAPER Mount the STATION into Fix the PLATE PLATE on the wall with 30mm SCREWS...
Seite 5
BS20 BA-11kW-APP PLATE WALLBOX SOCKET 30mm SCREWS 30mm PLASTIC BOLTS 30mm METAL BOLTS SCREW SHIM 95mm SCREWS ALLEN KEY HOOK REFERENCE PAPER Wallbox BS20 BA-11kW-APP Display Screen On/Off button Socket type 2...
Seite 6
Technical Parameters Level 2 EV Wallbox With charging socket type 2 Model: 3 phase current (3P + N + PE) Power connection: AC 230/400 V ± 10%, 50/60 Hz Mains voltage 11 kW Output rating (max.): 16 A per phase Output current (max): Residual current device with 30 mA AC + 6 mA DC...
Seite 7
Installation Guide Hammer the 30mm PLASTIC BOLTS REFERENCE PAPER into the holes of installing screw hole size and position Hammer the 30mm METAL BOLTS Wall into the holes Take down the Drill the holes according to REFERENCE PAPER the REFERENCE PAPER from the wall later Embed STATION into Fix the PLATE with...
Seite 8
Illustration of Screen and LED THREE PHASE EV Charger EV Charger Press The Button 22.8℃ 22.8℃ Start-up screen Wait for connecting the charging Wait for identification (the version no. is for reference only) cable with the Wallbox and car. EV Charger EV Charger EV Charger L1:220V...
Security Warning To avoid damage or injury, be sure to observe all safety instructions, warnings and notes marked with the - symbol must be observed! The user must have read these instructions including all safety instructions and warnings. The user must have read and understood this manual including all safety instructions. Should the user fail to observe and comply with the operating, care and safety instructions in this manual and on the wallbox, it may result in malfunction, electric shock, fire and/or serious injury to the user and damage to either the vehicle or the wallbox.
DECLARATION OF CONFORMITY Wallbox with type 2 charging socket: Product: BS20 BA-11kW-APP, Wallbox 11kW-with type 2 charging socket Brand: Besen Art.-no.: 0010002 EAN: 4260105915043 Wallbox with charging cabel and type 2 charging plug Product: BS20 BC-11kW-APP, Wallbox 11kW with charging cable and type 2 charging...
Wallbox-Übersicht Zubehör für BS20 BC-11kW-APP SCHRAUBEN FÜR 30 mm SCHRAUBEN MONTAGEPLATTE WALLBOX MONTAGEPLATTE 6 mm DÜBEL HAKEN BOHRSCHABLONE Übersicht LCD-Anzeige LED LADEZU- STANDSANZEIGE An / Aus Ladekabel mit Ladestecker Typ 2...
Spezifikation Level 2 EV Ladestation mit Ladekabel und Ladestecker Typ 2 Modell: Drehstrom, 3 Phasen (3P + N + PE) Netzanschluss: AC 230/400 V ± 10%, 50/60 Hz Netzspannung: 11 kW Maximale Ausgangsleistung: 16 A je Phase Maximaler Ausgangsstrom: Fehlerstrom-Schutzeinrichtung 30 mA AC + 6 mA DC mit Gleichstromerkennung: - 25°C ~...
Seite 13
Installationsanleitung Bohrschablone Hämmern Sie die für die Größe und die 6 mm Kunststoffdübel Position der Befestigungs- in die Löcher bohrung Wand Nehmen Sie die Bohren Sie die Bohrschablone Löcher gemäß der von der Wand ab Bohrschablone Befestigen Sie die Hängen Sie die Montageplatte mit Wallbox in die den 30 mm Schrauben...
Wallbox-Übersicht Zubehör für BS20 BA-11kW-APP MONTAGEPLATTE 6 mm DÜBEL WALLBOX STECKDOSE 30mm SCHRAUBEN UNTERLEGSCHEIBEN 30mm GEWINDEHÜLSEN IMBUSSCHLÜSSEL 95mm SCHRAUBEN HAKEN BOHRSCHABLONE Model LS Wallbox Übersicht LCD Anzeige LED LADE - ZUSTANDSANZEIGE An / Aus Taste Steckdose Typ 2...
Seite 15
Spezifikation Level 2 EV Ladestation Modell: mit Ladesteckdose Typ 2 Netzanschluss: Drehstrom, 3 Phasen (3P + N + PE) Netzspannung: AC 230/400 V ± 10%, 50/60 Hz Maximale Ausgangsleistung: 11 kW Maximaler Ausgangsstrom: 16 A je Phase Fehlerstrom-Schutzeinrichtung 30 mA AC + 6 mA DC mit Gleichstromerkennung: - 25°C ~...
Seite 16
Installationsanleitung Hämmern Sie die 6 mm BOHRSCHABLONE Dübel in die Bohrlöcher für die Größe der Befestigungsbohrung Hämmern Sie die 30 mm Gewindehülsen in die Wand Bohrlöcher für die Steckdose Bohren Sie die Löcher Nehmen Sie das gemäß der Bohrschablone Bohrschablone von der Wand ab Befestigen Sie die Hängen Sie die Wallbox...
Erklärung zum Bildschirmmenü und LED Anzeigebalken DREI PHASEN EV Charger EV Charger EV AC Charger Connect the Charging Connector Press The Button 22.8℃ 22.8℃ Startbildschirm Warten Sie bitte auf die Bitte verbinden Sie die Wallbox (die Versionsnummer dient nur als Referenz) mit dem Fahrzeug Fahrzeugidentifizirung EV Charger...
Sicherheitswarnung Um Schäden oder Verletzungen zu vermeiden, beachten Sie unbedingt alle mit dem - Zeichen versehenen Sicherheitsanweisungen, Warnhinweise und Hinweise! Der Nutzer muss diese Anleitung inklusive alle Sicherheitshinweise gelesen und verstanden haben. Sollte der Nutzer die Bedien-, Pflege- und Sicherheitshinweise in dieser Anleitung und auf der Wallbox nicht beachten und einhalten, kann es zu Fehlfunktionen, Stromschlägen, Feuer und/ oder schweren Verletzungen für den Nutzer und Schäden entweder am Fahrzeug oder an der Wallbox führen.
KONFORMITÄTSERKLÄRUNG Mit Type 2 Ladesteckdose: Produkt: BS20 BC-11kW-APP, Wallbox 11kW-mit Typ 2 Ladesteckdose Marke: Besen Art.-Nr.: 0010002 EAN: 4260105915043 Mit Ladekabel mit Typ 2 Ladestecker Name: BS20 BC-11kW-APP, Wallbox 11kW mit 6 m Ladekabel und Typ 2 Ladestecker Marke: Besen Art.-Nr.:...