Unpacking And Handling; Installation Warnings - Nilo TARGET BEAUTY 8133 Betriebsanleitung

Environmental conditions for transport : Temperature from -40°C to +60°C
Relative humidity from 10% to 75%
Athmospheric pressure from 500 hPa to 1060hPa

UNPACKING AND HANDLING

To grant safe handling of the armchair, please strictly adhere to the following instructions:
- Make sure the lifting equipment are suitable to the weight of the armchair
- Use exclusively flat lifting belts
- Even in case of manual lifting, place lifting belts only nearby the fix base and not on mobile
parts.
In case forklifts are used, place the armchair on a proper pallet.

INSTALLATION WARNINGS

Make sure the electricity set up of the destination site was carried out in compliance with the
existing rules. The site floor must be smooth, flat and able to bear the weight of the bed.
Make sure that the voltage(Volts) and the power (Watt = Volt x Ampere) are compatible with
the electricity available at the outlet in the wall.
Plug in the power cable to a suitable outlet.
Make sure the outlet is ground connected.
It is absolutely prohibited to install the equipment near bathtubs, basins or any other contai-
ner/sources/equipments that might accidentally spread and/or contain liquids, as well as
near flame or heat sources: the danger exists even when the equipment in not being used.
Environmental conditions for use : Temperature from 0°C to +50°C.
Make sure the installing location space is sufficient, considering the extra space needed for
installation and handling of mobile parts.
Make sure free space all around the chair is sufficient, considering operatorʼs moving.
17