Volume Setting; Safety Advice; Technical Specifications - fontastic MACARO Bedienungsanleitung

GB
Skip Backwards: Tap the multifunction sensor of the
right head 3 times.
Skip Forwards: Tap the multifunction sensor of the left
headset 3 times.
Hands-free control
Answer/Hang up Call: Tap the multifunction sensor
(2) once.
Reject call: tap and hold the multifunction sensor (2) for
one second when the call comes in.
Voice dial /Voice Command: When in standby, tap and
hold the multifunction sensor for 2 seconds.
The voice Command is activated.

Volume setting

To increase the volume, tap the multifunction sensor
(2) on the right-hand headset 2 times.
To decrease the volume, tap the multifunction sensor
(2) on the left-hand headset 2 times.
Refer to : „Note for Headset Use".
Note: Rarely does it happen that the headset's
superbass is clipping by mobile phone settings. In
this case, use the „Normalise" function (also known
as „Adjust volume") in the audio settings of your
phone.

Safety advice:

• Do not use the headset at high volume for prolonged
periods of time.
• Be careful not to use headset in potentially dangerous
situations.
• Do not use the headset while operating a vehicle.
• Never open the device.
• Never immerse the device in water, always protect it
from moisture.
• Disconnect electronic devices from the power when
not using them for longer time.
• Do not use headphones if they show any visible
damage

Technical Specifications:

Headsets
• BT version 5.0
• Profiles: Headset, Handsfree, A2DP, AVRCP
• Range: up to 10 m
• Driver: 8 mm
3
• Frequency: 20Hz-20KHz
• Sensitivity: 96 ± 3dB
• Built-in microphone
• Status LED
• Battery: 30 mAh
• Operating time: up to 3 hours
• Weight per unit: 3g
Charging case:
• Built-in battery for headset charging
• Battery: 250 mAh
• Status LED
• USB Type-C charging port
• Dimensions: 44 x 44 x 28 mm
The company is not responsible for any damage due
to improper operation.
If you need technical support, please contact our sup-
port team by e-mail at service@fontastic.eu.
We hereby declare, that this device carries the
CE mark in accordance with the regulations
and standards. It conforms with the fundamental requi-
rements of the (RED) 2014/53/EU directive.
The full text of the EU Declaration of Conformity is
available at the following Internet address
www.d-parts.de/Konfo
Note on environmental protection:
After the implementation of the European
Directive 2012/19/EU in the national legal
system, the following applies: Electrical and
electronic devices may not be disposed of with
domestic waste. Consumers are obliged by law to return
electrical and electronic devices at the end of their
service lives to the public collecting points set up for this
purpose or point of sale. Details of this are defined by
the national law of the respective country. This symbol
on the product, the instruction manual or the package
indicates that a product is subject to these regulations.
By recycling, re-using the materials or other forms of
utilising old devices, you are making an important
contribution to protecting our environment.
GB
4