Connectors; Network Connector - Axis Communications P1368-E Installationsanleitung

AXIS P1368-E Network Camera

Connectors

Network connector

RJ45 Ethernet connector with Power over Ethernet (PoE).
Audio connector
The Axis product has the following audio connectors:
• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel
is used from a stereo signal).
• Audio out – 3.5 mm output for audio (line level) that can be connected to a public
address (PA) system or an active speaker with a built-in amplifier. A stereo connector
must be used for audio out.
3.5 mm audio connectors (stereo)
1 Tip
Audio Input
Microphone/Line in
Audio Output
Line out (mono)
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection,
event triggering, and alarm notifications. In addition to the 0 V DC reference point and power (DC
output), the I/O connector provides the interface to:
Digital input - For connecting devices that can toggle between an open and closed circuit, for
example PIR sensors, door/window contacts, and glass break detectors.
Digital output - For connecting external devices such as relays and LEDs. Connected devices
can be activated by the VAPIX® Application Programming Interface, trough an event or from
the product's webpage.
4-pin terminal block
2 Ring
24
3 Sleeve
Ground
Ground