Digitus DN-13005 Schnellinstalationsanleitung Seite 10

2. Select My Network Places
3. Click Display the Computers of Workgroup
4. Double click Microsoft Windows Network icon.
5. Double click the Workgroup that MFP server belongs to. The default
Workgroup name is "ARBEITSGRUPPE". You can refer to MFP Control
Center or server's web pages to get it. You will see that the MFP server
will be displayed as the default host name "DN-13005" or the host name
that you set.
6. If you can not find Workgroup name of MFP server in Microsoft
Windows Network, you can select Search Computer in My Network
Places and type the server's hostname or IP address (eg, default host
name "DN-13005" ) to find it.
7. Double click this host name icon. The folders will be displayed as
USB1_DxPx, and USB2_DxPx where Dx represents the x-th disk and
Px represents the x-th partition with respect to USB1 port and USB2
port.
8. If you clear Enable SMB/CIFS Print/File Server Authentication in
Supported Protocols, you login to the SMB server without requiring
authentication; otherwise you have to type user name and password to
login to the server. You can add user name and password in User
Account box by MFP control center or server's Web page.
If you use SMB on Windows 98 SE/ME, you must login to your
Windows 98 SE/ME using the same user name as in server's User
Account.
9. Perform Open, Paste, Remove or Copy the files to the shared folders.
-
Using FTP Method for Sharing Storages
1. Open Microsoft IE
2. In Web Address List, type command: "ftp://server's host name " or
"ftp:// server'sIP address". If you have changed the default FTP port : 21,
you have to add the new port number in the tail of command as
"ftp://server's host name:ftp port" or "ftp://IP address of server: ftp port"
3. The shared folders will be listed in IE.
4. If you set Enable Server Authentication in FTP server protocol
settings you have to type user name and password to login to the
server; if you set Allow Anonymous Login, you can use the user name
"anonymous" to login with Read-only permission. If you clear server
authentication, you do not need username or password to login to the
10