Simons Voss Technologies WaveNet LockNode SH AX Bedienungsanleitung Seite 4

Important information
- Do not touch electronics/components; do not allow them to
come into contact with oil, paint, moisture, alkali or acids.
- Do not bend flexible circuit board!
- Specialist knowledge in access control systems, door
mechanics, door approvals, electronic system installation and
the use of SimonsVoss software is required when installing
SimonsVoss LockNodes. Only trained technical staff may
install LockNodes.
- See LSM manual on how to programme.
- SimonsVoss Technologies GmbH accepts no liability for any
damage caused by incorrect fitting or installation.
- Access through a door may be blocked due to defective or
incorrectly programmed products. SimonsVoss Technologies
GmbH is not liable for any consequences, such as blocked
access to injured persons or those at risk, physical damage or
any other losses.
- Modifications or further technical developments cannot be
excluded and may be implemented without notice.
- The German language version is the original instruction
manual. Other languages (drafting in the contract language)
are translations of the original instructions.
- SimonsVoss Technologies GmbH hereby declares that WNM.
LN.I.S2/SI.LN.I.S2 complies with the requirements of Directives
2014/53/EU resp. UK statutory 2017 No. 1206, 2014/30/EU
resp. UK statutory 2016 No. 1091, 2011/65/EU resp. UK statuto-
ry 2012 No. 3032, 2012/19/EU resp. UK statutory 2013/3113
and Regulation (EC) No 1907/2006 and the corresponding
UK statutory.
You will find a complete EU/UK declaration of conformity at:
https://www.simons-voss.com/en/certificates.html.