Maintenance; Maintenance Plan; Cleaning - Zipper Maschinen ZI-KM1000 Betriebsanleitung

14

MAINTENANCE

Turn the machine off, disconnect the spark plug and let the machine cool
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.

14.1 Maintenance plan

Servicing period
Engine oil l Inspection
(15W40)
Change
Air filter Inspection
Change
Spark plug Inspection
Change
Wheels Inspection
Change
V-belt Inspection
Change
Fuel- Inspection
system
Change
Provide appropriate servicing upon the earlier of the following: in the given month or after the
specified hours of operation (HOO) have expired.

14.2 Cleaning

Clean the machine and the working attachment from soil, dustetc.
The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the
machine!
Therefore: When cleaning, use only mild detergent
The use of high pressure cleaners is not recommended. It shortens the service life and reduces
the operational integrity. (Water can get into the gear!)
Impregnate bare surfaces of the machine against corrosion (e.g., anti-rust WD40)
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-KM1000
down before performing any maintenance and cleaning work!
N O T I C E
Before After:
any 1 month
using 5 HOO
X
X
X
X
X
N O T I C E
A T T E N T I O N
After:
3 month 6 month
25 HOO
X
MAINTENANCE
After: After:
12 month
50 HOO 100 HOO
X
X
X
After:
25 month
250 HOO
X
31