How To Use; Specifications - BEGLEC SYNQ AUDIO RESEARCH DIGIT 2K2 Bedienungsanleitung

ENGLISH

HOW TO USE

STEREO OPERATION:
 Connect the audio signal to the inputs (15 or 16)
 Set the operation mode switch (13) to "stereo"
 Connect the matching speakers to the L+R Speakon
 Make sure the mains voltage matches 230Vac before connecting the
mains cable to the earthed wall socket.
 Set both input gains (2) to zero
 Make sure there's a music signal at the input
 Turn the amplifier on (8)
 Adjust the input gains (2) to the desired level
BRIDGE OPERATION:
 Connect the audio signal to the left input (15 or 16)
 Set the operation mode switch (13) to "bridge"
 Connect the matching speaker(s) to the Bridge Speakon
 Make sure the mains voltage matches 230Vac before connecting the
mains cable to the earthed wall socket
 Set both input gains (2) to zero
 Make sure there's a music signal at the left input
 Turn the amplifier on (8)
 Adjust the left input gain (2) to the desired level, leave the right channel
gain to zero.
MONO OPERATION:
 Connect the audio signal to the input of the left channel (15 or 16)
 Set the operation mode switch (13) to "mono"
 Connect the matching speakers to the L+R Speakon
 Make sure the mains voltage matches 230Vac before connecting the
mains cable to the earthed wall socket
 Set both input gains (2) to zero
 Make sure there's a music signal at the input
 Turn the amplifier on (8)
 Adjust the left input gain (2) to the desired level, leave the right channel
gain to zero.
SYNQ
®
OPERATION MANUAL
®
outputs (11)
®
output (12)
®
outputs (11)
5/36 DIGIT amplifiers
ENGLISH

SPECIFICATIONS

Power stereo 8Ω
(1kHz, THD+N<0,1%)
Power stereo 4Ω
(1kHz, THD+N<0,1%)
Power bridge 8Ω
(1kHz, THD+N<0,1%)
Power mono 8Ω
(1kHz, THD+N<0,1%)
Power mono 4Ω
(1kHz, THD+N<0,1%)
Power efficiency
Freq. Resp.
(+/-1dB)
Input Sensitivity
Input impedance unbalanced
Input impedance balanced
S/R ratio
(A-Weighted)
Damping factor (5Hz-1kHz)
Slew Rate
Cooling
Signal inputs
Speaker outputs
Power supply
Dimensions (WxHxD mm)
Weight (kg)
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
SYNQ
®
OPERATION MANUAL
Digit-2K2 Digit-3K6
2x 650Wrms 2x 1050Wrms
2x 1100Wrms 2x 1800Wrms
1x 2200Wrms 1x 3600Wrms
2x 650Wrms 2x 1050Wrms
2x 1100Wrms 2x 1800Wrms
>90% >90%
5 – 36.000Hz 5 – 36.000Hz
1000mV 1000mV
10 kΩ 10 kΩ
20 kΩ 20 kΩ
>100dB >100dB
280 280
29V/uS 29V/uS
variable speed fan variable speed fan
Balanced XLR/Jack Balanced XLR/Jack
® ®
Speakon Speakon
AC230V / 50Hz AC230V / 50Hz
482x44x301(19"/1U) 482x44x301(19"/1U)
5,5kg 5,6kg
6/36 DIGIT amplifiers