Textron Klauke HK60 VPFT Bedienungsanleitung Seite 21

Instruction Manual HK60 VPFT
_____________________________________________________________________________
6. Troubleshooting
a.) The indenters (Pos.-No. 1) came to a standstill during the crimping process respectively
the crimping tool doesn't reach the final operating pressure
=> Actuate the pump lever (Pos.-No. 3) and simultaneously push the retract lever
(Pos.-No. 4).
b.) The tool loses oil.
=> Return the tool to the manufacturer. Do not open the tool and damage the seal of
the tool.
7. Putting out of operation/waste disposal
The disposal of the various components of the tool have to be treated separately. Doing that
the first step is to dispose of the oil at special delivery points.
Attention
Hydraulic oils represent a danger for the ground-water. Uncontrolled draining
of or improper disposal is under penalty. (environmental liability law)
The remaining parts of the unit can must be disposed of according to the domestic
environmental standards. Because of possible environmental damages we recommend to
dispose of the tool by professional companies. A return of the old tool free of charge to the
manufacturer cannot be granted.
Instruction manual HK60 VPFT
___________________________________________________________________________
6. Troubleshooting
a.) The indenters (Pos.-No. 1) came to a standstill during the crimping process respectively
the crimping tool doesn't reach the final operating pressure
=> Actuate the pump lever (Pos.-No. 3) and simultaneously push the retract lever
(Pos.-No. 4).
b.) The tool loses oil.
=> Return the tool to the manufacturer. Do not open the tool and damage the seal of
the tool.
7. Putting out of operation/waste disposal
The disposal of the various components of the tool have to be treated separately. Doing that
the first step is to dispose of the oil at special delivery points.
Attention
Hydraulic oils represent a danger for the ground-water. Uncontrolled draining
of or improper disposal is under penalty. (environmental liability law)
The remaining parts of the unit can must be disposed of according to the domestic
environmental standards. Because of possible environmental damages we recommend to
dispose of the tool by professional companies. A return of the old tool free of charge to the
manufacturer cannot be granted.
All manuals and user guides at all-guides.com
page 21
page 21