App Control / Wlan - Krug+Priester IDEAL AP140 PRO Betriebsanleitung

App Control / WLAN

App Control
Your purifier can additionally be controlled by the "IDEALAIRPRO" App via your
smartphone / tablet (iOS /Android).
WLAN
Enabling/disabling WLAN
The air purifier is connected to the power supply and switched off.
Press and hold down the Quiet button (D) until the air quality indicator (E) flashes
The WLAN is enabled

when the air quality indicator (E) flashes blue
 The WLAN is disabled
when the air quality indicator (E) flashes white.
Resetting the WLAN
The air purifier is disconnected from the power supply.
Press and hold down the Quiet button (D), plug in the power cable and continue to hold down
the Quiet button (D) until the air quality indicator (E) flashes pink
The WLAN is reset to factory settings.

Note:
To ensure a stable WLAN connection, a minimum distance of 1 m between air purifier and
smartphone/tablet should be maintained during setup (connection setup).
E
Air quality indicator
39
D
Quiet button