Fan Speeds; Timer Function - Krug+Priester IDEAL AP140 PRO Betriebsanleitung

Control panel
A
On/off button
F
Filter replacement
indicator

Fan speeds

• Press the on/off button (A) to switch the air purifier on or off.
• T he air purifier runs in automatic mode . In automatic mode, the fan speed (G) automatically
adapts to the measured air quality. The worse the air quality, the higher the fan speed.
• Press the fan speed button (B) to exit automatic mode. The air purifier now runs at
fan speed . Press again to increase the fan speed to
Press again to increase the fan speed to
• T he turbo speed setting for fast purification of the ambient air requires the air purifier to run at
maximum capacity. This can only be selected manually.
Timer functions
Pressing the timer while the air purifier is switched on activates the "switch-off timer"
set time, the air purifier switches off:
• Switch the air purifier on (on/off button A).
• Press the timer button (C) to activate the timer. Press repeatedly to increase the timer time:
(h)
  
lights up) to disable the timer function.
• The timer indicator counts the respective time with (
displayed.
Pressing the timer button while the air purifier is switched off activates the "switch-on timer"
 after the set time, the air purifier switches on.
B
Fan speed button
G
Fan speed indicator
J
Daylight sensor
. Each number lights up in turn. Press the timer button again (no number
E
Air quality indicator
L
Air quality sensor
K
IR receiver
, or to the turbofan speed
Countdown). The remaining time is

33
C
Timer button
H
Timer indicator
I
.
.
D
Quiet button
Quiet indicator
after the
