Assembly - Sage the Citrus Press Pro 800CP Kurzanleitung

All manuals and user guides at all-guides.com

Assembly

ASSEMBLING THE JUICER
1. Pull the juice press arm up, away from the
motor base, until fully extended.
2. Place the juice collector onto the drive shaft
on top of the motor base, ensuring the juice
spout fits into the semi-circular groove at the
front of the motor base.
3. Insert the filter into the juice collector,
aligning the indent with arrow in the bottom
of the filter over the corresponding tab
with arrow in the juice collector.
6
4. Place the juicing cone onto the drive shaft
and press down lightly to lock the cone
into position.
5. To insert the fruit dome, place it into the
hole on the underside of the juice press arm.
The fruit dome is magnetic and will stick
into place.
6. Ensure the anti-drip juice spout is pushed
down into the pouring position.