Samsung 7-Serie Bedienungsanleitung Seite 26

Basic Features
¦ Using Data Service
(Italian only)
Allows the user to use information (text, still images,
graphics, documents, software, etc.) transmitted via
broadcast media.
✎
If you switch the channel while the Data broadcast
window is displayed, the previous window may appear
temporarily.
Auto Run Data Service (On / Off)
Sets whether or not to automatically run data service. Auto
Run Data Service automatically runs data service without
user intervention.
✎
If any other secondary function is under way, Auto Run
Data Service may not work.
Using Data Service
If the channel you are currently watching
provides data service, you can enjoy a
variety of data services by pressing the or
red D button.
✎
Provided Data Service information
may vary depending on broadcast.
✎
While using data service, changing the
channel using the numeric buttons may not be possible
depending on the service.
1. Press the D button. Select a desired service by pressing
the wheel (▲/▼/◄/►) and OKE buttons.
✎
If Auto Run Data Service is On, the data service
will automatically run with loading banner. In this
case, the D button does not work.
2. Press the red button. The data service screen will be
displayed.
3. Move to a desired option by pressing the wheel
(▲/▼/◄/►) button on the data service screen and then
press OKE. The selected service will be started.
✎
If a Colour button of a certain function appears on
the screen, you can use the offered function by
pressing the corresponded button.
4. If you press button, data service will be closed.
EXIT
26
English
Main Data Service buttons and their functions
Button
D (Data
Service)
BACKR
Colour Button
Symbol
D
TEXT
▲/▼/◄/►
OKE
EXIT e
Operation
Displays the Data Service list and
immediately starts Data Service.
Returns to the previous screen.
Perform functions corresponding to each
Colour button image displayed on the
screen during Data Service.
✎
Operations may differ depending on
the service provider.
Text can be inputted using the numbers
and letters printed on and above the
numeric keys on the remote control. If
you input the numeric keys on the remote
control one by one into the blank where
the cursor is located on the text input
screen, the corresponding lettering,
numbers or special characters will be
displayed.
e.g., If you press the number 3 key in
rapid succession, then the assigned
letters (D, E, and F) and the number 3 will
alternately appear in order of input.
Switches to teletext mode or Returns to
the previous screen.
✎
Operations may differ depending on
the service provider.
Moves the Data Service menu up,
down, left and right.
Runs a selected item.
Stops a running Data Service.