Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
The wireless on-ear headphone BOOM is your perfect companion to listen to music and for
phone calls.
Package contents
• Fontastic
Headphone BOOM
®
• Micro-USB charging cable
• 3,5mm jack cable
• This user manual
If any of the above pieces is missing, please pack the product again and return to dealer.
Overview
1. Hinge | Height adjustment
2. Headband
3. On/Off button | Music Start/Stop
4. Volume- button | Previous title
5. Volume+ button | Next title
6. Telephone button
7. LED indicator
8. 3.5 mm Line-in connector
9. Microphone
10. Micro USB connector
11. Ear cushions
12. Speaker
LED functions
Connected
Blue fl ashes slowly
Not connected
Blue and red fl ash alternately
Incoming call
Blue fl ashes slowly
Charging
Red light goes on permanently
Pairing
Blue and red fl ash alternately
Getting Started
Charging the battery
The Fontastic
BOOM is equipped with an internal rechargeable battery.
®
Connect the BOOM with the micro USB cable which is included in the package contents.
The cable can be connected to a computer or a standard USB power supply.
The red led of the BOOM condition is indicated by a acoustic signal.
Note: Charge BOOM for at least 3-4 hours before initial use.
Adjustment
BOOM offers the possibility to adjust the loudspeakers in height to the optimum position
for you. To do this, hold the loudspeaker unit up and pull the headphone strap (2) upwards.
Adjust the headphones in this way until the ear pads are exactly on the ear.
Switching On /Off
To switch on, press the multifunction button for 3 seconds, an acoustic signal sounds,
the blue LED fl ashes quickly.
To switch off, press the multifunction button for 3 seconds, an acoustic signal sounds,
the blue LED goes off.
Pairing
BOOM must be paired with a Bluetooth
part is carried out on the headphone and the other is carried out on the other Bluetooth
device.
Note: Please note that different mobile phones may require different pairing methods.
1. In the off state, press and hold the multifunction button for 3 seconds to turn on.
Keep the button pressed and wait until the blue and red LED fl ashes alternately.
This indicates the pairing mode.
2. Use your Bluetooth
®
enabled device to search for Bluetooth
3. The Bluetooth
device should indicate that it has found „BOOM".
®
4. Confi rm pairing with BOOM. Enter „0000" if you are asked for a pairing code.
If you are unsure about the pairing procedure of your Bluetooth
device manual. When using a Bluetooth
and wait a few seconds until the connection with BOOM is established.
Note: If the connection is lost or the transmitter is temporarily disconnected, briefl y press the
multifunction button. BOOM will then try to restore the connection.
Music playback
Start music playback on the Bluetooth
®
transferred to the BOOM. Stop the music playback on the Bluetooth
streaming. You can use the BOOM as a wired headphone without Bluetooth
the 3.5mm jack cable that is included in the package content. For that purpose connect the
cable with the BOOM and the desired device and start music playback.
Wireless Headphone BOOM
2
1
11
11
10
9
8
7
®
device before use. This is a two part process; one
®
audio devices.
®
device, please check your
transmitter without display, set it to pairing mode
®
source which is paired with the BOOM. The music is
®
source to interrupt the
function with
®
Music control
To play or stop music playback, briefl y press the Start/Stop button (3).
To skip to the previous track, press and hold the Volume- button (4).
To skip to the next track, press and hold the Volume+ button (5).
Note: The mobile phone must support the A2DP and AVRCP profi le for music streaming and
control. The buttons have no function when using the wired connection. Use the audio source
to control the music and volume.
Hands-free features
With its built-in microphone and intelligent noise reduction, the BOOM is perfectly suitable for
phone calls.
Answer/end/reject calls
To accept an incoming call, briefl y press the Telephone button (6).
To end a call in progress, briefl y press the Telephone button (6).
To reject incoming calls, press and hold the Telephone button (6), until the call is rejected.
Redial
Press the multifunction button twice to redial the last dialled number.
3
Volume setting
To increase the volume, press and hold the volume + button until the desired volume is
4
reached.
To decrease the volume, press and hold the volume - button until the desired volume is
5
reached.
6
Technical data:
• BT Version 4.2
• Profi les: Headset, Handsfree, A2DP, AVRCP
• Range: aprx. 10m
• Input: 5V DC
• Frequency Response: 20Hz-20KHz
• Impedance: 32 Ohm
• Built-in high performance microphone
• Audio line-in
• Status LED: blue/red
• Micro USB charging port
• Battery type: 300 mAh
• Operation time: aprx. 5 hrs.
• Weight: 185 g
Safety advice:
• Do not open the device
• Do not hold the device under water
• Keep it safe from humidity
• Do not connect the adapter to the device by using force
• Keep the device away from children
• Disconnect electronic devices from the power when not using them for longer time.
• Do not use the device when it has visible defects.
In case you need technical support, please contact our support-team by e-mail under
service@fontastic.eu.
Registration and Safety
Certifi cation/General Information
We hereby declare, that this device carries the CE mark in accordance with the regulations
®
and standards. It conforms with the fundamental requirements of the (RED) 2014/53/EC,
EMC directive 2004/108/EC as well as the Low Voltage Directive 2014/35/EC.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EC in the national legal
system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end
of their service lives to the public collecting points set up for this purpose or point of sale.
Details of this are defi ned by the national law of the respective coun-try. This symbol on the
product, the instruction manual or the package indicates that a product is subject to these
regulations. By recycling, re-using the materials or other forms of utilising old devices, you
are making an important contribution to protecting our environment.
Technische Änderungen vorbehalten / Fontastic, by D-Parts Mobilphon & Zubehör GmbH ● Birkenweiherstr, 16 ● 63505 Langenselbold, Germany / V1_09_17
GB
Werbung
