Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Watch face setting
Press the side button to activate the display and turn the side but-
ton to change the watch face. Alternatively activate the display and
press and hold on the current watch face for approx. 3 seconds.
Swipe left or right to scroll between the available watch faces and
confirm your selection by tapping on the display.
Tap on „Load more watch faces" in the app, here you have the
choice of hundreds of watch faces,
which you can install on Talis. If you tap on a watch face, it will be
uploaded to the watch.
Note: Uploading pictures and watch faces to Tila will take
about 90 seconds.
Activating the submenu
By swiping the touch-sensitive display to the right or top, you can
access the menu items. By touching a desired menu item, you
activate the menu.
15
Note: Use the button on the side to activate the display and
return from any submenu to the clock display interface.
Steps
Touching the menu „STEPS" will show the step count, burned
calories and distance.
Sleep
The determined sleep duration is displayed here if you wear the
FontaFit Talis while sleeping. Further data will be displayed in the
app.
Note: Sleep is recorded if the time of falling asleep is between
20:00 and 10:00, sleep is longer than 4 hours and the wrist-
band is permanently connected to the smartphone. The wrist-
band should not be taken off directly when getting up.
Heart Rate/Blood Pressure/Sp02
Touching this menu item starts the heart rate, blood pressure or
oxygen saturation measurement.
Werbung
