Before Assembling - GARDY SHELTER 7022 Aufbauanleitung

ENGLISH

BEFORE ASSEMBLING

2 people with little assembly experience can easily assemble the greenhouse

in 1 or 2 days.
PACKAGE CHECKING :
Please check the pieces in the package at reception and before assembly. Contact us in
case of missing or defective parts.
You can use the parts list for the checking.
All dimensions are approximate.
GROUND FOUNDATION :
A good foundation is very important. It must be level to avoid problem with window or door
opening.
According to your ground, we recommand to dig 15-20 cm, fill with sand, compact and then
put concrete or pavement slab foundation or cast concrete foundation (recommanded).
Foundation level should always be above ground level.
WALL PANELS PRETREATMENT :
Before starting to assemble, you must treat the rough wood with a stain or any other product
that optimally protects the wood. This product must be UV resistant and must guarantee the
wood protection against humidity and biological attacks.
Panels must be dry before assembly. ATTENTION! Do not clog the joints in the planks,
tongues and grooves with paint.
Once the greenhouse is assembled, we recommend the following treatment:
• Apply the 2nd coat of colored stain or paint with high UV protection. Colorless / clear stain
protects less well against UV rays than colored stain. For a better the protection, choose a
dark stain.
• Follow the instructions of your paint / stain supplier.
If you notice that the wood is starting to "ooze", repeat the stain or paint treatment.
NECESSARY TOOLS:
Ladder, stain or paint, brush, roller, knife, hammer, rubber hammer, phillips and flathead
screwdrivers, level, saw, screwer, power drill, safety glasses.
SECURITY
TOOLS AND MATERIALS:
Although all the wooden parts have been sanded, there is always the possibility of splinters.
So be careful when handling the elements. Gloves, safety glasses and long sleeves should
2