Problem Chart; Technical Specifications - Steinigke Showtechnic OMNITRONIC PM-311P Bedienungsanleitung

7 Problem Chart

PROBLEM
The power does not
turn on.
There is little or no
sound.
No function in MP3
player operation.
There is noise
distortion.

8 Technical Specifications

Power supply:
Power consumption:
USB port:
Available storage media:
Playback format:
Inputs:
Line/phono:
Line:
DJ microphone:
Outputs:
Master:
Record:
Headphones:
Frequency range:
S/N ratio:
Distortion:
Dimensions (LxWxH):
Weight:
Specifications are subject to change without notice due to product improvements.
CAUSE
• The power cable is not connected.
• The input selector switch is in the
wrong position.
• The connection
connected properly or not connected at all.
• The terminal or plug is dirty.
• The master level is too low.
• The USB was not recognized.
• The USB device is not compatible.
or
• The master level is too high.
• The input level is too high.
12 V AC via supplied power unit connected to230 V AC, 50 Hz
Max. 4 W
USB type A
USB devices up to 32 GB (FAT32)
MP3, WAV
2 x stereo RCA
stereo RCA
6.3 mm jack, unbal.
stereo RCA
stereo RCA
6.3 mm stereo jack (≥32 Ω)
20-20000 Hz
>75 dB
<0.07 %
260 x 172 x 78 mm
1.5 kg
• Connect the cable to a power outlet.
• Set the selector switch to the correct
signal source.
cable was not • Connect the cable properly.
• Clean and reconnect.
• Increase the level with the master
control.
• Remove the USB device and re-insert it.
• Try using another device.
• Via the output meter, adjust the
master level to an optimum level with
the master control.
• Via the output meter, adjust the
channel to an optimum level with the
gain control.
PM-311P
17 • EN
REMEDY