Quax STRETTO 54 05 15 Serie Handbuch Seite 30

STRETTO
Quax
First dreams First dreams
®
First steps First steps
5. Assembling the bedside table
Step 3 : Use the top B and four
connectors 1
Tighten the connectors (1) in the
provided openings underneath the
top (B).
30
Nachttafel met lade
54 05 15xxxx
Nachttisch mit Schublade
Chevet avec tiroir
Bedside table with drawer
Step 1 : Use both end sides AL and AP, the
slides 9L and 9P, four wood screws 7, four
wooden dowels 3, six cylindrical nuts 4, four
connectors 1 and four eccentrics 2
Push two wooden dowels (3) in the provided
openings at the edges of the end sides (AL
and AP). Insert the eccentrics (2) in the pro-
vided openings at the upperside of the end
sides. Place the left slide (9L) on the drill-
ings of the left side (AL) and tighten with the
wood screws 7. Use the third hole on the
front of the slides. Repeat on the right side
(AP) with the right slide (9P). Fix the con-
nectors (1) in the drillings at the underside
of the sides. Push the cylindrical nuts (4) in
the holes at the underside of the sides.
Step 2 : Use the bottom C,
four wooden dowels 3 and
four eccentrics 2
Push two wooden dowels
(3) in the provided open-
ings on the sides of the
bottom (C). Insert four ec-
centrics (2) in the provided
openings underneath the
bottom.