Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INFLATION
Step 1: Before Inflation
•
Choose an open location to carefully unfold your board with the soft EVA pad
facing upwards. Keep the board away from sharp or pointy items. Make sure
all the components are fully functional.
•
Check your board each time before using to make sure that there is no
leaking points or tears.
Step 2: Inflate Your Board
1
Open the valve cap
counterclockwise.
3
2
Screw the pump hose onto
the valve clockwise.
Begin to pump steadily. Do not inflate your
board too fast.
Pump until the gauge reads 10 to 15 psi.
(Do not inflate your boards fully when the
temperature is high)
Inflation
5
Werbung
Inhaltsverzeichnis
