Explanation Of Symbols; Specifications - Eufab 13459 Bedienungsanleitung

LED interior light 12V
CONTENTS
1. PROPER USE OF THE PRODUCT ___________________________________4
2. SCOPE OF DELIVERY _________________________________________4

3. SPECIFICATIONS ____________________________________________4

4. SAFETY PRECAUTIONS ________________________________________4

5. EXPLANATION OF SYMBOLS _____________________________________4

6. OPERATING INSTRUCTIONS _____________________________________4
6.1 OVERVIEW _______________________________________________4
6.2 PREPARATION _____________________________________________4
6.3 INSTALLATION _____________________________________________5
6.4 OPERATION _______________________________________________5
7. MAINTENANCE AND CARE ______________________________________5
8. NOTES REGARDING ENVIRONMENTAL PROTECTION ______________________5
9. CONTACT INFORMATION _______________________________________5
WARNING
Please read the operating instructions carefully prior to use and
observe all safety instructions!
Not observing these may lead to personal injury, damage to the
device or to your property!
Store the original packaging, the receipt and these instructions so
that they may be consulted at a later date! When passing on the
product, please include these operating instructions as well.
Please check the contents of package for integrity and completeness
prior to use.
1. PROPER USE OF THE PRODUCT
The LED interior lights allow you to design the interior or your vehicle individually. The remote
control can be used to adjust the brightness, colour and e ects of the lights.
This device is not designed to be used by children or persons with limited mental abilities or
without experience and/or lack of required specialist knowledge. Keep children away from the
device.
The device is not designated for commercial use.
Proper intended use also includes the following all information in this manual, especially
following the safety instructions. Any other utilisation is considered to be contrary to the
intended purpose and may lead to material damage or personal injuries. EAL GmbH assumes no
liability for damage resulting from improper use.
2. SCOPE OF DELIVERY
4 LED strops with IR-controller and IR-receiver
1 connecting cable for vehicle power socket
3. SPECIFICATIONS
Operating voltage: 12 V DC
9 LEDs (RGB) per strip
4. SAFETY PRECAUTIONS
• The warning triangle sign indicates all instructions which are important for
safety. Always follow these instructions, otherwise you could injure yourself
or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without
supervision.
• Do not treat packaging material carelessly. It may become a dangerous toy for
children.
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• Do not extend or shorten the connecting cable.
• For your own safety, only use accessories and spare parts that are stated in
these instructions or that are recommended by the manufacturer!
• Install the LED light strips inside your vehicle so that they do not glare you.
• The LED light strips may only be attached inside the vehicle, they may not
shine outside.
• Install the cables so that they do not hinder operation of the vehicle.
• The cables may not be crushed, kinked or crimped. Do not lay the cables over
sharp edges.
• The installed cables may not hinder the function of seat adjustment features,
the handbrake or foot pedals.
• Do not install the LED light strips near the airbags.
• Attach the cables securely. They may not become tripping hazards when
entering or leaving the vehicle.
4
1 remote control with battery (CR2025)
1 Instructions for use
Protection class: IP 65
Cable length: approx. 2 x 1.00 m / 2 x 1.50 m
5. EXPLANATION OF SYMBOLS
Complies with EC directives
Labelled electrical products may not be disposed of in the household waste
Labelling according to § 17 BattG (German battery laws):
The end consumer is obliged by law to send batteries to the dealer for proper
disposal or to hand them into an appropriate collection point.
Protected against duct penetration (dust-proof)
IP 65
Complete touch protection
Protected against jet water from any angle
6. OPERATING INSTRUCTIONS
6.1 OVERVIEW
1 Remote control
2 IR-controller
3 IR-receiver
4 LED light strips
6.2 PREPARATION
Select a suitable place to put the LED light strips (position 4 in the overview) (below the
dashboard, in the foot space, below the seats etc.). Test the installation rst before permanent
attachment (see Point 6.3 Installation). Clean the installation place (Figure 2). The surfaces must
be free of dust and grease.
Remove the transport lock for the battery in the remote control (Figure 3).
Figure 2: Clean the installation site
Figure 3: Remove the transport lock
5 Vehicle plug connector with a cable
6 Switch
7 Hollow plug connector
Figure 1: Overview 1