Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Height adjustment of the routing table plate on the machine table
It may happen that the height alignment of the FTP and HPL milling table plates for the GTS10 does not fit on the machine table. In this case please
follow the following instructions for adjustment on the machine:
For height adjustment, release the red locking lever
and push the profile rail/s backwards (in the direction
of the saw blade).).
On both sides of the GTS10XC there are rail sections mounted, which are adjustable in height
through a slotted hole. This allows the router table plate to be aligned with the machine table of
the table saw.
Werbung
