Setting Up Your Event Tent/Humanity Tent Ev - GYBE EVENT Aufbauanleitung

SETTING UP YOUR EVENT TENT / HUMANITY TENT EV
5
Open the infl ation valve (5A).
Before infl ating the tent, be sure that all
defl ation valves are closed.
6
Now fill the tent with either an electric or
hand pump, using the inflation valve.
Please make sure that the pump tube is
firmly attached, and that it does not get
twisted.
8
All manuals and user guides at all-guides.com
A
ATTENTION
Once the strut has been filled, the inflation
valve must always be closed with the
attached plug.
Further, be sure not to let the internal
pressure
of the strut exceed 6 psi (0.4 bar).
The ideal pressure for the strut is between
4 and 5 psi (0.25 and 0.35 bar).
7
With some gentle lifting, the tent will be
guided to its fi nal form.
Finally, close the inflation valve.
Now you can attach the guy ropes
( → page 27), side panels ( → page 22),
and water- or sandbags ( → page 23)
as needed.
EN
19