Maxspect ICV6 Bedienungsanleitung Seite 2

ENGLISH
ZigBee Signal Indicator
This indicator is always slowly flashing while the ICV6 is working.
Power Indicator
This indicator is always on while the ICV6 is working.
Saving Indicator
This "red" indicator is on only when responding to specific operations.
Wi-Fi Indicator
This indicator works in two status: flashing and breathing.
Function Switch Button
This button is used to switch between functions.
Not in use, prepare for future function.
The different mode.
AP Mode: Mobile device directly connects to the ICV6.
STA Mode: Mobile device connects to the ICV6 through a router.
AP->STA: While
button. will turn into breathing status. Now the ICV6 is working in STA mode, mobile
device can be connected to ICV6 through router.
Tips: is constantly on while the ICV6 is connected to router, press
flashing then release the button.
released from the router.
STA->AP: While
then release the button.
mode.
Restore to The Factory Setting.
First disconnect the ICV6's power, then press and hold
power, don't release the button until
is in flashing status. Press
will turn into breathing status. Now the ICV6 is
is in breathing status. Press
will turn into flashing status. Now the ICV6 is working in AP
is flashing.
until is flashing then release the
button until is constantly on
and reconnect the ICV6 to
until is