Operation; Maintenance; Trouble Shooting; Specification - CombiSteel 7455.1095 Gebrauchsanweisung

Operation

1. Before the ignition of the oven, remove the protective film and all polyfoam inside the chamber.
2. Turn on the main switch.
3. Turn upper and lower thermo-control to the desired temperature. Power indicator lights up when the
heating element works. The light turns off if the desired temperature is reached. The heating element is
automatically switched on if the chamber temperature is lower than the desired setting temperature. At the
same time the indication light turns on if the heating element is working again.
4. To switch off the oven, turn off the main switch.

Maintenance

Before executing any kind of maintenance, including cleaning, you must disconnect the oven electrically and wait
for the complete cooling. In the case of malfunction or damage to the oven, you must apply for authorized
assistance, from the manufacturer or authorized dealer.
Cleaning – The cleaning must be done every time the oven has been used following all the rules to prevent
malfunctioning of the oven and for hygienic purposes. Using a suitable spatula and soft metal brush, remove the
cooking residues from the fire stone, which should then be removed with an aspirator.

Trouble shooting

Problem Possible solution
1. Check if electrical wiring is correctly connected.
2. Set the upper and bottom thermo-control to the desired temperature.
No heating
3. Correct input voltage or phase.
4. Call authorized dealer with other problems.
Electric shock Stop using the oven and call authorized dealer for service.
Bad burning smell
Call authorized dealer to check electrical circuit.
Uneven cooking Re-et upper and bottom thermo-control.
Or call authorized dealer to check whether the heating element is burnt and replace it.

Specification

Temperature
Model
range
7455.1095 0~350 ℃
Outside dimension Chamber dimension
(mm)
685x675x430
www.combisteel.com
Rated voltage
(mm)
2x 500X500X115
Rated Power
(V) (KW)
230 3
4