Basic Use; Turning The Tv On Or Putting It In Sleep Mode; Source Selection; Volume Control - Listo 32HD-843 Bedienungsanleitung

• Turning the TV on or putting it in sleep mode

This television is either on or in sleep mode. It cannot be completely shut down. If you do not
plan to use your TV for a long time, unplug the mains plug from the power outlet.
- To turn on the TV
Make sure that the mains plug is connected.
Press the (Power) button on the remote control or directly in the centre of the control
button on the bottom of the TV. The power indicator turns off.
- To put the TV in sleep mode
Press the (Power) button on the remote control or briefly press the centre of the control
button on the bottom of the TV to display the menu. The power indicator turns red.

• Source selection

SOURCES
TV
SIDE AV
HDMI 1
HDMI 2
• Setting the volume
Press the V+ or V- buttons on your remote control to adjust the volume according to preference.
If you want to mute the sound, press the
cancel this function.

• Programme selection

Press the P+ or P- keys of the remote control to change channels.
You can go straight to the TV channel you want by pressing the 1, 2, 3... buttons on the remote
control. To select channel 12 for example, press the 1 key followed by the 2 key.

• Displaying the channel list

While watching a channel, press the OK button to display the list of stored channels.
V.1.0

BASIC USE

Once the external systems are connected to your television, you can
switch between your different input sources: DTT, SIDE AV, HDMI1 ,
HDMI2.
Press the button on the remote control.
Then use the  or  buttons on the remote control to highlight an
entry and press the OK button on the remote control to confirm it.
(Mute) button on your remote. Press
46
again to