Always disconnect the product
from the mains when it is
unattended or after use .
Cleaning and storage
mWARNING! Risk of
injury! Allow the product to
cool down completely before
cleaning .
Always remove the power plug
from the electrical outlet before
cleaning the product .
Store the product in a cool,
dry place, protected from
moisture and out of the reach
of children .
Before first use
Remove the packaging . Check if all parts are
complete .
NOTE: The product may give off some odour
during first use . These are production or
transport residue that will quickly subside .
Operation
NOTES:
Hair must be clean, dry and free from styling
products . This excludes special products that
support curling .
Comb the hair thoroughly before curling .
Use the product in a well-ventilated room .
Fold out the stand
7 ]
[
Place the product on a heat-resistant surface .
Connect the power plug
electrical outlet .
Switch on the product by moving the on/off
switch I/O
to I position . The indicator
[
2 ]
lamp
flashes red to indicate that the
[
6 ]
product is heating up .
Unfold the clamp
1 ]
[
strand of hair on the curling iron
Wind the strand of hair up to the hairline on
the curling iron . Do not touch your scalp while
doing this (Fig . B) .
As soon as the set temperature is reached, the
indicator lamp
[
6 ]
After you are finished with styling or when the
product is no longer used, move the on/off
switch I/O
to O position immediately . The
2 ]
[
indicator lamp
6 ]
[
Remove the power plug
outlet . Allow the product to cool down
completely in a well-ventilated location .
NOTE: Make sure the product is out of reach
of pets or young children during or after use .
.
to a suitable
5 ]
[
. Clamp the tip of a
.
8 ]
[
lights up red continuously .
goes out .
from the electrical
5 ]
[
GB/IE
21