Operation - OWIM BL HGL A1 Bedienungs- Und Sicherheitshinweise

Regularly check the power
plug and the power cord for
damages . If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .
For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable
in the electrical circuit supplying
the bathroom . Ask your installer
for advice .
The use of extension cords is
not recommended . If the use of
an extension cord is necessary,
it must be designed for a
current flow of at least 10 A .
Lay cords in such a way that
they may not be tripped over or
otherwise damaged .

Operation

WARNING! Risk of
electric shock! Do
not use this product near
bathtubs, showers, basins
or other vessels containing
water .
The product must not be
left unattended while it is
connected to the supply mains .
GB/IE 19