Parts & Tools; Typical Undersink Installation - AEG PREMIUM Installations- Und Bedienungsanleitung

Included:
• Filter head, bracket & mounting screws
• Filter cartridge
• Tubing
• Adaptor fittings
• Washer
Not Included:
• Slotted and Phillips screwdrivers
• Pliers and adjustable jaw wrench
• Tubing cutter
• Electric drill
• Teflon tape

TYPICAL UNDERSINK INSTALLATION

Locate the water filter housing on the cold water supply pipe, under the kitchen and/or bathroom sink, to
filter the cold water. Refer to the following drawing.
Filtered water
faucet
SINK
HOT
shutoff valve
PARTS & TOOLS
INLET
COLD
NOTE: Be sure to allow a minimum space of 4 cm under the
system for removing the filter cartridge to change it
2,5 cm
9.5 mm (3/8")
tubing from cold
water supply
OUTLET
yellow collar on
push-in fitting
38
1"
mounting
screws (2)
INLET
9.5 mm
(3/8") tubing
to faucet
OUTLET
blue collar on
push-in fitting
FIG.2