Functional Description - Miele PAC 1045 Gebrauchsanweisung

en - Description of the machine

Functional description

1. The Miele air purifier draws in atmospheric air at the bottom via the air intake vents in
the plinth ().
2. The pre-filters () filter coarse dust out of the air.
3. The air is conveyed upwards by the fan inside the air purifier and is pushed through
the main filter and the active charcoal filter (). Up to 99.995 % of particles are
filtered out of the air during this process.
4. The cleaned air is released back into the room via the air outlet vents () in the lid.
The control panel () behind the lockable access flap is used to control the various oper-
ating modes (e.g. CO2 mode
also possible to operate the appliance based on specified times.
After every use, air heated to 70 °C flows through the bottom of the main filter () for 20
minutes.
All components are installed in a high-quality metal housing with acoustic and thermal in-
sulation. The castors on the bottom of the air purifier make it easy to move around.
42
). The fan can be regulated according to the room size. It is