Klarstein GENEVA Bedienungsanleitung Seite 9

Cover
Winder
Housing
Drawer
OPERATION
• Insert the AC Adaptor provided into the socket located at the back of the Watch-
Winder before inserting plug into the power outlet.
• Open the cover at the front of the Watch-Winder.
• Gently pull out the watch holder, using your forefinger and thumb.
• Place the watch on the watch holder. Set the watch holder onto the Watch-Winder,
then close the cover.
• The „On/Off'' switches are located at the back of the Watch-Winder. Flip the
switch to the „On" position for the watch-holder in use.
• The „Rotation Mode" switches are located at the front of the Watch-Winder. Tum
the „Rotation Mode" switch to the required mode - either A/B/C/D.
Note: The mode cycles are described on the next page.
Switches
Modes
A/B/C/D
EN
9