Before First Use - SOLIS 1030 Bedienungsanleitung

BEFORE FIRST USE

Open the battery compartment cover on the
bottom of the appliance and insert two AAA
1,5V batteries. Please pay regard to the polar-
ity of the batteries. Push the cover back over
the battery compartment so that it audibly
locks into place.
STARTING UP
1. Place the scale on a dry, clean and even work
surface. Switch the scale on with the ON/OFF
button, the display first states "88888" and
then "0.0g". "zero" lights up to the left. This
indicates that the scale is functioning properly,
otherwise, the display would permanently
state "88888".
Notes:
If no weight is placed on the scale, it auto-
matically switches off after 60 seconds.
If the scale was overloaded (max. weight:
650g), the display would state "0_Ld".
34