Technical Data; Scope Of Delivery; Mounting / Dismounting; Putting Into Operation - T.I.P. SSI 600 LED Original-Gebrauchsanweisung

4. Technical Data

Model
Operating voltage
Rated power pump
Protection class pump / protection class LED spotlight
1)
Max. flow rate (Q )
max
Max. delivery head (H
Fountain height
Max. Temperature of the pumped liquid (T
Battery pack
Weight (net)
Range remote control
Item number
1) The values were determined with free, unreduced outlet.

5. Scope of delivery

Floating solar island with solar panel and LED lighting (1), battery operated pump (2), four different fountain
attachments (3), remote control (4), operating instructions.

6. Mounting / Dismounting

Important! The pump must not run "dry". Otherwise damage to the device cannot be excluded!
The figures mentioned in the following text refer to Fig. I, Fig. II and Fig. III at the end of the operating instructions.
•
Unpack all components carefully.
•
Mount the pump on the pump connection (7).
•
Then remove the plug from the power connection socket (8) and plug the power cable of the pump into it.
Make sure that the plug is absolutely tight.
•
Now turn the SSI upside down and select a suitable fountain attachment (3). Now your floating island is ready
for use.
•
Please make sure that the SSI is not completely submerged in water - it may only float on the water surface.
The polystyrene float (5) is used for this purpose.

7. Putting into operation

Observe safety measures!
The connecting cables of the device must not be damaged!
The battery must be fully charged before switching on the device!
1)
)
max
)
max
SSI 600 LED
6 V DC
0.8 Watt
IPX8 / IPX8
150 l/h
0.8 m
~ 30 cm
40 °C
3.7 V – 2000 mAh Li Ion
ca. 0.8 kg
max. 10 m
30335
2
7