Hohem iSteady Multi Bedienungsanleitung Seite 15

Calibration
The calibration is required if you spot on of these problems:
1. The pitch angle is not level with the horizontal surface.
2. The roll angle is not parallel to the horizontal surface.
3. The pan axis drifts when the gimbal is on all lock mode.
Calibration Instructions
Method 1: Offline Calibration
1. Power on the gimbal, long press the mode button over 6 seconds till the mode light turns on.
2. Lay the gimbal on a static flat surface without any vibration. Calibration is completed once the
mode light flashes twice.
Method 2: 6-Side Calibration Via App
Please, make sure the gimbal is connected with the app via Bluetooth successfully, then enter
"Calibration" and follow the instruction in the app to calibrate the gimbal.
15