Telldus 14191 Bedienungsanleitung

Connect to a remote control
Koppla ihop med fjärrkontroll
1.1
1.1
1.
Press/tryck/trykk/
paina/drücken
7 sec
2. Connect outlet to Telldus Live
Koppla uttag till Telldus Live
Koble mottakere til Telldus Live
2.1
2.1
live.telldus.com
Control
Devices
2.3
2.3
Add new device wizard
Select your device type:
433,92 MHz receivers
2.5
2.5
Add new device wizard
Select your device model:
Self Learning On/Off
2.7
2.7
WARNUNG: Nur zur Verwendung in Innenräumen. Span-
nungsfrei nur bei gezogenem Stecker. Nicht hinterein-
ander stecken. Nur in trockenen Räumen verwenden.
Empfängerkategorie: Klasse 3
2.9 2.9
Control
Devices
Window lamp
2.
Blink, blink, blink etc.
(15s)
Secure
Group
230V~ 50Hz
live.telldus.com
Manage Trigger
Scheduler Events
off on
Koble til en fjernkontrol
Liitä Kaukosäädin
1.2
1.
Within/inom/innen/
kuluessa/drinnen
15 sec
Requires a TellStick and a Telldus Live! account
Liitää Vastaanottimen Telldus Live
Empfänger mit Telldus Live Verbinden
2.2
2.2
Add a new device
2.4
2.4
Add new device wizard
Select your device brand:
2.6 2.6
Add new device wizard
Enter name:
Name:
* Any name may be used/Valfritt namn/Valgfritt namn/
Nimi on vapaa valinta/Jeder Name kann verwendet werden
2.8
2.8
Add new device wizard
1. Install the outlet as explained under "Installation" in
the manual.
2. Keep the outlet programming button pressed for
7 seconds. The LED blinks slowly.
3. Press the learn button below within 15 seconds
to link the outlet. (The programming mode is automatically
disabled if no pairing signal is received.)
4. The connected lamp blinks three times as confirmation.
2
Learn
If the paring fails, repeat steps 2-4 again. The distance
to the receiver may have to be shorter when pairing than
during ordinary use.
Follow us on social media for events,
offers and inspiration!
Setup
Locations
Eine
Fernbdienung
Anschliessen
2.
<CLICK, CLICK>
Window lamp
Next
live.telldus.com
Done
1
3