Herunterladen Diese Seite drucken

Telldus Z-Wave Kurzanleitung

Range extender with on/off & timer outlet

Werbung

Q U ICK G UIDE
Easy installation of your
Telldus Z-Wave Range Extender
with On/Off & Timer Outlet
1.5
1.5
Add new device wizard
Include Z-Wave device
Include device by enabling inclusion mode on the device within 60 seconds.
This is usually done by clicking three times on the button on the device.
Refer to the manual of your device on how to enter inclusion mode.
When in inclusion mode the device will automatically be included.
14 sec
Interview command class 2 of 12... (23% done)
Follow the built-in wizard • Följ den inbyggda guiden • Følg
den innebygde veiviseren • Folgen Sie den Anweisungen
des integrierten Assistenten • Seuraa sisäänrakennettua
ohjattua asennusta • Følg den indbyggede vejledning
2. Placing the device
Placering av enheten • Plassering av enheten • Platzierung des Gerätes • Laitteen sijainti • Placering af enheden
2.1
2.1
2.2
2.2
Wait/Vänta/
Vente/Odottaa/
Warten/Vent/Poczekaj
10 min*
1. Include the device in Telldus Live
Lägga till enheten i Telldus Live • Inkludere enheten i Telldus Live • Das Gerät in Telldus Live einschließen
Laitteen liittäminen Telldus Live • Inkludere enheden i Telldus Live
1.1
1.1
1.3
1.3
1.6
1.6
Add new device wizard
x3
Choose a name for your device:
Name:
* Any name may be used/Valfritt namn/Valgfritt namn/
Nimi on vapaa valinta/Jeder Name kann verwendet werden
* Please note: The Z-Wave mesh net-
work-routing is updated automatically.
It is normally done within 10 minutes
but can take up to 24 hours. In order to
update the routing of battery powered
Z-Wave devices they need to be awake.
Please refer to the user manual of your
Or/Eller
device in order to wake it up. Depending
on the device it can take several updates
before it discovers the new route.
* Vänligen notera: Rutterna i
Z-Wave-nätverket uppdateras automa-
tiskt. Detta sker vanligen inom 10 minuter
men kan i vissa fall ta upp till 24 timmar.
För att uppdatera rutten för en batter-
idriven Z-Wave-enhet krävs att enheten
är vaken. Se enhetens användarmanual
för instruktioner om hur du väcker den.
Beroende på vilken enhet du har kan det
ta fl era uppdateringar innan enheten
hittar den nya rutten.
Add a new device
My Device*
Next
1.2
1.2
live.telldus.com
1.4
1.4
433.92 MHz
1.7
1.7
Control
Devices

Werbung

loading

Inhaltszusammenfassung für Telldus Z-Wave

  • Seite 1 1. Include the device in Telldus Live Lägga till enheten i Telldus Live • Inkludere enheten i Telldus Live • Das Gerät in Telldus Live einschließen Laitteen liittäminen Telldus Live • Inkludere enheden i Telldus Live Q U ICK G UIDE...
  • Seite 2 3. Control the device in Telldus Live 4. Edit the device and use the countdown timer Styra enheten i Telldus Live • Styre enheten i Telldus Redigera enheten och använda nedräkningstimern • Redigere enheten og bruke nedtellingstimeren • Das Gerät Live •...