Herunterladen Diese Seite drucken

KEUCO IXMO 59551 019501 Montageanleitung Seite 3

Vorschau ausblenden Andere Handbücher für IXMO 59551 019501:

Werbung

DE
Wichtige Informationen, bitte unbedingt lesen!
Diese Anleitung ist für den Installateur zur Mon-
tage sowie für den Nutzer zur Bedienung und
Wartung des Produktes. Bitte nach der Installati-
on an den Nutzer zur Verwahrung weitergeben.
Symbole und Bedeutung
Achtung! Warnung vor Personen- oder
Sachschaden.
Hinweis, Tipp oder Verweis
Falsche Montage
Korrekte Montage/Funktionsprüfung
Montagedetail beachten
Kaltwasser
Wasserfl uss
Optional/Zubehör
Verwendungszweck
Einhebelmischer für die Verwendung im Bade-
zimmer.
Technische Daten
– Durchfl uss bei 3 bar Fließdruck:
Einbaumaße, siehe Seite 2
Installation, siehe ab Bild 1 auf Seite 8
Nur neutral vernetzendes Silikon verwenden.
Bedienung, siehe Bild 8 auf Seite 9
Temperatur- und Durchfl ussbegrenzung, siehe Bild 9
bis 11 auf Seite 9
Montage in umgekehrter Reihenfolge.
Wartung, siehe Bild 12 auf Seite 9
Montage in umgekehrter Reihenfolge.
– Anzugsmoment Kartuschenmutter:
Ersatzteile mit Bestellnummern, siehe Seite 11
Hinweise zur Gewährleistung und Pfl ege sind
dem beiliegendem Pfl ege- und Garantiepass
zu entnehmen.
Warmwasser
Kein Wasserfl uss
ca. 23 l/min
12-13 Nm
EN
Important information, please read!
These instructions are for both the installer for
installation and the user for operation and main-
tenance of the product. After installation, please
hand them over to the user to keep.
Symbols and explanations
Attention! Warning against bodily injury or
damage to property.
Note, tip or reference
Incorrect installation
Correct installation/test of functionality
Observe installation details
Cold water
Water fl ow
Optional/accessories
Intended use
Single lever mixer tap for use in bathrooms.
Technical specifi cations
– Flow at 3 bar pressure:
Installation dimensions, refer to page 2
Installation, refer to picture 1 on page 8
Use only neutrally netting silicone.
Operation, refer to picture 8 on page 9
Temperature controll and fl ow rate limiter, refer to
picture 9 to 11 on page 9
Assemble in reverse order.
Servicing, refer to picture 12 on page 9
Assemble in reverse order.
– Cartridge nut torque:
For spare parts with order numbers, refer to page 11
For warranty and care information please refer
to the attached warranty and care instruc-
tions.
Hot water
No water fl ow
approx. 23 l/min
12-13 Nm
3

Werbung

loading