Turn Off; Special Instructions - clearaudio electronic Professional Power 24V Bedienungsanleitung

User manual / Bedienungsanleitung
5. Turn off
Professional Power 24V
Due to the
on the front panel (Standby mode) of the
turntable itself.
You can leave the main switch on the back on, so when you switch the unit on again, the device is
immediately ready for use and does not have to start up first.
However, the turntable must be reactivated at the desired speed.
6. Special instruction
6.1) Maintenance
For your own safety, you should inspect regular the mains voltage lead. If the insolation is damaged,
please have it replaced immediately by a specialist!
6.2) Transport
Please note that the full warranty can only be provided for products that are sent back in the original
box.
6.3) Service
If any servicing or repair of a Clearaudio product is necessary, please first contact your dealer or
distributor. Alternatively contact Clearaudio directly and we will inform you about your nearest
service location.
Page / Seite 6
you can turn off the turntable by pressing the ON / OFF button
Professional Power 24V
. You don't have to switch off the
© clearaudio electronic GmbH, 2021-05