Troubleshooting - NISBETS ESSENTIALS FD499 Bedienungsanleitung

UK
1. Remove the collection tray.
2. Lay the appliance face down.
3. Unscrew the two screws
holding the safety guard at the
rear of the Fly Killer
[Fig. 1].
4. Lift up the guard rail [Fig. 2].
5. Holding the ends of the bulb,
twist it 'forwards' in its socket
until it clicks [Fig. 3].
6. Slide the bulb up out of its
sockets [Fig. 4].
7. Replace with a new bulb.
8. Twist the new bulb 'backwards'
to lock it back in place.
9. Replace the guard rail and the
two screws.

Troubleshooting

Fault
The appliance is The unit is not switched on
not working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Tube has expired
Tube is faulty or has not been fitted
correctly
4
FD499_ML_A5_v1_20201217.indb 4 FD499_ML_A5_v1_20201217.indb 4
1
2
3
4
Probable Cause
Check the unit is plugged in correctly and
switched on
Call Nisbets Essentials agent or qualified
Technician
Replace the plug fuse
Check power supply
Call Nisbets Essentials agent or qualified
technician
Refer to the 'Changing the Bulb' section
Solution
2020/12/17 10:29 2020/12/17 10:29