Cisco Systems Linksys WUSB300N Schnellinstallation Seite 3

C.
Read the License Agreement
and click Next to continue the
installation.
D.
Locate an available USB port on
your PC. Connect the Adapter in
one of three ways:
Insert the Adapter into the USB
port.
If you want to use the included USB
Extension Base, first connect the
USB Extension Base to the USB port
on the PC, then insert the Adapter
into the USB port on the Base.
If you want to use the included
USB Extension Cable, connect the
Adapter to the female end of the
USB Extension Cable, then connect
the male end of the Cable to the PC.
E.
After you install the Adapter
correctly, the Congratulations
screen appears.
Click Finish.